深圳军盛微芯电子科技有限公司

Lattice usb线

*兼容性
2. 无需单独安装驱动，直接支持ispLever6.x/7.x/cl*ic版本，ispVM各种版本
3. 支持lattice全系列FPGA，SC/SCM/XP/XP2/EC/ECP2/ECP2M/MachXO
4. 支持lattice全系列CPLD, 1000/2000/4000 系列
5. U*标准B型接口，使用标准U*连接线即可连接PC
6. U*供电，无需外部供电支持
7. 支持JTAG, internal FLASH，SPI FLASH等编程模式
8. 10针分离镀金插针式接口，可支持不同目标板接口
（线示意图）

Lattice ispDOWNLOAD® Cable products are the hardware connection for in-system programming of all Lattice devices. After completion of the logic design and creation of a programming file with the Lattice Diamond®, isp­LEVER® Cl*ic or PAC-Designer® software, the Lattice Diamond Programmer, or Lattice's ispVM™ System soft­ware is used to control the programming of devices directly on the PC board. No additional components are required to program a device.

1.        After you complete your logic design and create a programming file with the Lattice Diamond/ispLEVER develop­ment tools, you can use ispVM™ System software or Diamond Programmer to program devices on your board. The ispVM System/Diamond Programmer software automatically generates the appropriate programming com­mands, programming addresses and programming data based on information stored in the programming file and parameters you set in ispVM/Diamond Programmer. Programming signals are then generated from the U* or par­allel port of a PC and directed through the ispDOWNLOAD Cable to the device. No additional components are required for programming.

2.        出货清单
1. 适配器1个
2. U* A-B型连接线1条
3. 75公分10针线1条